• Stepper Drives
  
• Stepper Motors
  
• Power supplies
  
• Cables (to interface the stepping motors to the stepping drive)
  
• Configuration Software
  

• Programmable logic controllers (PLCs) or other indexers and motion controllers act as a stepper motor controller to send step pulses and direction signals that are received by the stepper drive to allow very precise motion control.
  
  
• The SureStep stepper motor, microstepper drive and power supply products provide a low-cost, reliable, high quality solution to answer your positioning and motion control needs.

• 5 New Stepper Motors - 9 motors total
• Two NEMA 17 stepper motors
• Three NEMA 23 stepper motors
• Four NEMA 34 stepper motors - super high torque


• 2 New Stepper Drives - 3 drives total
• Standard stepper drive - STP-DRV-4035
• Advanced stepper drives - STP-DRV-4805 & 80100


• 3 New Linear Power Supplies - 4 power supplies total
• STP-PWR-3204 (32 VDC @ 4A)
• STP-PWR-4805 (46.5 VDC @ 5A)
• STP-PWR-4810 (46.5 VDC @ 10A)
• STP-PWR-7005 (70 VDC @ 5A)

(STP-DRV-4035)

• Max 3.5A, 40V
• DIP switch configurable
• Selectable microstepping: x2, x5, x10, x50 steps/revolution
• Idle current reduction
• Self test feature

(STP-DRV-4850)

• Max 5A, 48V and max 10A, 80V models
• Software configurable
• Programmable microsteps
• Internal indexer (via ASCII commands)
• Idle current reduction, Self test feature
• Anti-resonance, Torque ripple smoothing
• Step, analog, & serial communication inputs

(STP-MTR-17048)

• Square frame step motor style produces high torque
• 2-phase bipolar, 4-lead
• 1.8° per step, 200 steps per revolution
• Standard NEMA frame sizes (17, 23 & 34)
• Locking connectors for easy hookup (MTR and MTRH motors have different connectors)

(STP-PWR-3204)

• Linear, unregulated DC power supplies
• 120/240 VAC selectable input
• 32V, 48V, 70V DC output models available
• All models have additional 5VDC, 500 mA regulated logic supply
• Fusing included for both incoming AC and outgoing DC

Free!
(SURESTEP-PRO)

• Easy configuration of the stepper drive, stepper motor, I/O
• Serial command language available; No need for separate motion controllers or indexers; Easy interface PCs, PLCs and HMIs
• Easily use the ASCII output commands from most of our PLCs to enable indexing
• Extensive Help files
• For Windows Vista, XP, 2000, NT, ME, 98.

(STP-EXT-020)

• STP-EXT-020 - stepper motor (MTR) to stepper drive extension
• STP-EXTH-020 - stepper motor (MTRH) to stepper drive extension
• STP-232RJ11-CBL - stepper programming/communication